Skip to main content

ssid inventory

SSID Inventory & Configuration

Date: 2026-01-07
Last Updated: 2026-01-07
Status: Partially Documented

Current SSIDs (Verified)

Deco Mesh Router

SSID: helpingfriendlynetwork

  • Router: Deco X60 Mesh WiFi System
  • Network: 192.168.68.0/22
  • Gateway: 192.168.68.1 (MAC: 28:87:ba:76:5b:34)
  • Security: WPA2 Personal
  • Channel: 36 (5GHz, 160MHz)
  • PHY Mode: 802.11ax
  • Signal: -46 dBm / -88 dBm
  • Status: Active (you are connected)

To Document:

  • Number of Deco nodes
  • Guest network (if exists)
  • IoT network (if exists)
  • DHCP range

GL-iNet Router

SSID 1: BlueflySecure FOUND IN SCAN

  • Router: GL.iNet GL-BE3600
  • Network: 192.168.8.0/24
  • Router IP: 192.168.8.1 (MAC: 94:83:C4:C1:B1:D2)
  • Security: WPA2/WPA3 Personal
  • Channel: 36 (5GHz, 80MHz)
  • PHY Mode: 802.11a/n/ac/ax
  • Purpose: Trusted/admin devices
  • Security Zone: Trusted
  • Status: Broadcasting (router WiFi active)

SSID 2: AgentMesh TO BE VERIFIED

  • Purpose: Agent runners, Vast.ai, experiments
  • Security Zone: Untrusted
  • Policy: Isolated, outbound only
  • Status: Need router access to verify

SSID Standardization Rules

Critical Rules

  1. DO NOT broadcast same SSID from both routers
  • Causes roaming traps
  • Confuses device connections
  • Breaks security zones
  1. Each SSID maps to ONE security zone
  • helpingfriendlynetwork = Trusted (Deco)
  • BlueflySecure = Trusted (GL-iNet)
  • AgentMesh = Untrusted (GL-iNet)
  1. Use different PSKs for each SSID
  • Prevents cross-zone access
  • Enables proper isolation
  1. Channel Conflict: Both routers on channel 36
  • Deco: Channel 36 (5GHz, 160MHz)
  • GL-iNet: Channel 36 (5GHz, 80MHz)
  • Recommendation: Change GL-iNet to different channel

Verification Commands

Check Current WiFi

# macOS
system_profiler SPAirPortDataType | grep -A 20 "Current Network"

# List all networks
networksetup -listallhardwareports

Check Router SSIDs

Deco Mesh:

GL-iNet Router:

Related Documentation